Mytee® LTD120-LX Speedster® Carpet Extractor & Tile Cleaner (50 -1200 PSI)

Product Description

This Mytee LTD12 Speedster is really a monster of a multi-purpose cleaning machine! It has enough power with its adjustable pressure pump (50 – 1200 PSI) to be used as a tile cleaning machine to really blast dirt and grime from grout and other hard surfaces. The pressure can also be dialed down to use the machine as an effective carpet cleaner. It is extremely hard to find a dual purpose machine that work extremely well for cleaning both carpets and hard floors!

When using this machine on either tile or carpet, you’ll need to plug the 2 different power cords into two separate 20 amp circuit outlets that are on different breakers. The machine has an amber light on it that will illuminate when you have the cords plugged into outlets on separate breakers. The primary (right) cord has a yellow tag, and runs the vac motor #1 and the pump. The secondary (left) cord powers vac motor #2 and the pump-out.

One of the greatest features of this machine is how easy it is to use. There are a total of 4 buttons on the control panel, and then a dial next to the solution line for increasing and decreasing the water pressure. The 4 buttons are used to turn on vac motor #1, vac motor #2, the delivery pump, and the pump-out feature. To utilize the auto-fill and pump-out features for continuous usage on this machine, just connect a standard garden hose from a water source tothe auto-fill connection. Turn on the water source and let the tank begin to fill. It will shut off when the water level reaches the float switch in the solution tank.

To start using the auto-dump feature, simply connect a second standard garden hose to the pump-out connection and lay the other end of the hose in a drainable location. Activate the pump-out switch on the front of the machine and open the ball valve on the pump-out connection. The LTD12 will then start to automatically drain recovered water from the tank.

The Mytee LTD12 has multiple internal filters that must be cleaned regularly and are located in different spots throughout the machine. Please take a look at the manual listed below for full maintenance instructions and tips for taking care of your machine. One great tip to help extend the life of your machine is to run the vacuum motors after each job for a few minutes with the tank empty and lid off to allow excess moisture in the vac motors to dry out.

Not sure if this the right machine for you? Please feel free to take a look at our full line of multi-surface (tile & carpet) cleaning machines, or give one of our experts a call at 888-722-5508 for a personal recommendation on what machine will be the right fit for our particular needs.

Features

• Comes with auto-fill with chemical injection & auto-dump functionality for high end continuous cleaning with simple hook ups to standard garden hoses.
• Easy to use control panel that contains 4 buttons to power the pumps and vacuum motors, with a separate dial to adjust pump pressure.
• Adjustable PSI (50 – 1200) pump can be used for high end cleaning of both carpet & tile.
• Dual LX™ vac motors provide a ton of suction to leave floors & carpet drier than other models in its class.
• An amber light will illuminate when you have the 2 powers cords plugged into outlets on separate breakers.
• Comes with a 5 year warranty on the housing, 1 year on the motors & pumps, and 90 days on parts & labor.

Quick Overview

• Adjustable 1200 PSI pump for carpet & hard floor surfaces
• 145″ of waterlift, 250 CFM
• Hose, wand & other tools sold separately
• 11 gallon solution / 11 gallon recovery
• Chemical Injection and auto pump-out
• Non-heated carpet extractor & tile cleaner